ATON AIS-015 is designed for radio transmission of AIS information on CHO and it meets the requirements of IEC 62320-2. AIS ATON-015 is designed for visualization in ECDIS of buoys, lanterns and other real and virtual navigation marks in marine and terrestrial AIS for solving problems of prevention of collisions of vessels and improving safety of navigation. AIS ATON-015 can be installed on plastic buoys type 400/5, 400/7, 225/4 – at the top of the battery compartment of buoys, markers and SNL – in close proximity to the lantern.
ATON AIS-015 transmits messages №21, 6, 8, 12, 14 according to ITU-R M1371-3.

Operating frequency, MHz 161,975 (channel 87В) and 162,025 (channel 88В)
Transmitter power, W 4,5 ± 0,1 or 36,5dBm
Emission class F1B
Modulation Frequency with GMSK manipulation
Channel width, kHz 50
Antenna design 0,21λ-pin or ¼ λ-pin
Polarization Vertical
Wave resistance to antenna output, Ohm 50
Power supply, Volt From 9 to 30
Operating temperature range From –40° С to +50° С, max from –50° С to +70° С.
Housing material Aluminum, powder paint
Size L х W х H, mm 123 х 62 х 32,4
Mass, kg 0,56
Setting up Via interface RS-232
Operating period 5 years
Storage period 5 years
Additional outputs 2 analog inputs;2 digital inputs;

2 digital outputs

Included in the set AIS ATON-015 + Technical passport

Category: Download as PDF

The date of project completion: 09.01.2015

© All rights reserved by Copyright 2014.

Oops! We did it